In the last post I made the runner plank fastening arrangement to the hull. Also the runner plank needs some modifications in order to stay put once fastened to the hull. Stop blocks to keep the plank in place in sideways direction under fabrication.
Runner plank stop blocks glued and screwed.
Varnish applied to runner plank.
From an earlier project some grip tejp was left over.
Backrest fastening with stainless steel hinges.
Backrest folded down.
Springboard fastening.
Measuring so that everything is straight.
When all is lined up the holes for fastening bolts are drilled thru the spring board.
Springboard bolted to the hull with M8 bolts.
No comments:
Post a Comment