Welcome to MyIceBoat blog. The intention of this blog is to share my experiences and thoughts of my ice boat build. The blog is set up as a building diary were I post stuff during the build.
As I'm often referring to the designer Bernd Stymers building instructions the address to his home page can be found below where also the building instructions can be found!
http://www.isabella-iceboat.com/isabella.html
Please also visit my other blog at http://mydodgedartrearcouch.blogspot.com
Wednesday, 4 January 2017
Front runner.
Front runner was basically made in same way as the rear runners! Location of shaft hole is a bit different and no stiffeners should be needed.
"Designing" the parking break that will be on the front runner.
No comments:
Post a Comment