To present the running rigging correctly one should assemble the boat to show how everything works. I have not assembled the boat yet so at least for now this will have to do.
The fittings fastened to the mast extension are for tightening the luff of the sail.
The side blocks for trimming sail. There is one on both ends of the runner board.
The block in the cockpit. I might have to make some adjustments here neither the block type nor the location seems optimal!
The blocks on the boom for trimming sail.
I now consider the boat to be ready! Next on the agenda is to test the boat. Hope to get back with video footage of the shakedown test.
No comments:
Post a Comment